-
AMS item number: C008692-6
304 mm X 127 mm, 0.004 °C/W, Tubed Cold Plate.
The CP12™ is a dual-sided, copper tubed cold plate that offers high performance and a large mounting area. The tubes of the CP12™ cold plates are coplanar with the plate to allow for dual-sided mounting. The cold plate's tube side offers higher performance as the copper tubes are in direct contact with the component being cooled. Its epoxy-free construction results in 30% better performance than other similar sized cold plates. Our range of standard tubed cold plates provide cost-effective thermal solutions for component cooling applications where the heat load is low-to-moderate. These tubed cold plates consist of copper tubes pressed into a channeled aluminum extrusion. This “Press-Lock” technology eliminates the need for performance-limiting epoxy between the tube and the plate, resulting in superior thermal performance. Each tubed cold plate has a single tube with no joint, ensuring leak-free operation.
Length Cold Plate : | 304 mm |
Width Cold Plate : | 127 mm |
Performance : | 0.004 °C/W |
Fluid Compatibility: | Water, Common Coolants |
Wetted Path: | Copper |
Mounting Surface: | Dual-Sided |
Tube: | 9.5 mm |
Configuration: | 4-Pass |
Fitting: | Straight (SB) |
Plate Material: | Aluminum |
Maximum Pressure : | 150 psi |
Maximum Flow Rate : | 8 lpm |
Thickness : | 12.7 mm |
Type: | Tubed Cold Plate |