PZ1 Fiber Stretchers

PZ1 Fiber Stretchers Optiphase
 
  • SW11360
High Speed; Fiber Type SM, PM, RC; 780-1625 nm; Fiber Length 5-17 m; Fiber Stretch 0.035-0.21... more
Product information "PZ1 Fiber Stretchers"

High Speed; Fiber Type SM, PM, RC; 780-1625 nm; Fiber Length 5-17 m; Fiber Stretch 0.035-0.21 µm/V; Fiber Leads 1 m, 0.9 mm OD Jacket; Connector Type Bare Fiber, FC/PC, FC/APC

The PZ1 series are the high-speed members of Optiphase’s family of fiber stretchers. At the core of the PZ1 high-speed fiber stretchers is a fiber wound piezoelectric element for use in a wide range of optical interferometric measurement and sensing system applications.

Optiphase’s expertise in the design, manufacture and use of all-fiber interferometers has produced a unique multi-layer winding approach resulting in an enhanced modulation function while maintaining a high operational frequency. PZ1 high-speed fiber stretchers are available with single mode (SM), commercial polarization maintaining (PM, Panda or Bowtie) or SM reduced cladding (RC) fiber types

PZ1 high-speed fiber stretchers deliver a high performance to cost ratio, exceeding all other known competitive devices. The compact and low-profile form factor makes the PZ1 series easily configurable into small spaces.

In addition, Optiphase fiber stretchers are unique in that they do not require proprietary drivers. For most low-voltage applications (<±15 V), Optiphase stretchers can be driven by standard electronics such as signal generators, op-amps or other laboratory equipment without modification. For more information on how to drive PZ1 high-speed fiber stretchers see the downloadable application note.

Key Features:

  • High Speed
  • Compact Package
  • Fiber Type: Single Mode (SM), Polarization Maintaining (PM )or Reduced Cladding SM (RC) Fiber
  • Multiple Termination Choices
  • Unique Multi-layer Winding
  • Can Be Driven With General Purpose Electronics
  • Operational Wavelength: 780 to 1625 nm
  • Fiber Stretch: 0.035 to 0.21 µm/V
  • Optical Path Displacement (n = 1): 0.05, 0.2, 0.3 µm/V
  • Time Delay: 0.00017 to 0.001 ps/V
  • Fiber Length: 5, 12.3, 17 m Inclusive
  • Fiber Wind: 4 Layer (1 Layer PM Version Available)
  • Optical Loss: ≤0.5 dB
  • Maximum Voltage Range: ±500 V (Off Resonance, 1,000 V Peak-to-Peak)
  • Fiber Leads: 1 m, 900 μm Loose Tube
  • Connector Type: Bare Fiber, FC/PC, FC/APC
  • Dimensions: 50.8 x 50.8 x 21.6 mm

Applications: Open Loop Demodulation; Sensor Simulation; Variable Optical Delay; General Purpose Fiber Interferometry; Large-angle Modulation of Interferometric Phase

Product Group: Fiber Stretchers
Manufacturer Series Name: PZ1
Related links to "PZ1 Fiber Stretchers"
Read, write and discuss reviews... more
Customer evaluation for "PZ1 Fiber Stretchers"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.

Top seller
Viewed