The OLS2 series is a liquid level sensor for single point liquid level detection. The sensor has an infra-red emitter and detector aligned within an accurately shaped cone to give good optical coupling when the sensor is in air....
The OLS5 series is a liquid level sensor for single point liquid level detection. The sensor has an infra-red emitter and detector aligned within an accurately shaped cone to give good optical coupling when the sensor is in air....
The OLS7 series is a liquid level sensor for single point liquid level detection. The sensor has an infra-red emitter and detector aligned within an accurately shaped cone to give good optical coupling when the sensor is in air....
DB 15+2 Cable Assembly
The WCB406 cable mates with the Thermoelectric Output and Sensor connector on the rear panel of the TC5 LAB, TC10 LAB and TC15 LAB temperature control instruments. It is 3-feet long, 14-gauge on the power TEC...
200-1000 nm; ADC Resolution 16 bit; Integration Time 0.1-6,500 ms; Interface and Power Supply USB 2.0; Dimensions Controller Board 69.0 x 49.5 mm; Dimensions CCD Daughter Board 20.0 x 49.5 mm
Many scientific and industrial...
Horizontal PER <20:1; Beam Diameter 20, 38, 40 mm; Lens 25,75,150 mm, Collimating; Min. Layer Thickness 10-50 µm; Single High-flex Umbilical
Luna’s T-Ray® 5000 measurement system is one of the fastest terahertz systems available...
1-8 Channels; Max. Sensor Length/Channel 10, 50 m; Measurement Points/m 384, 768, 1,538; Measurement Rate 10-250 Hz; Strain Measurement Range ±12,000 µɛ; Temperature Measurement Range -40 to 200 °C
Luna’s ODiSI 6000 series of...
Type SR Current Sense Resistors utilize Caddock's Micronox® resistance films to achieve a low cost resistor with Non-inductive Performance. This compact construction makes this sense resistor ideal for many...
Twelve standard models in five network arrangements of Caddock's 1787 Current Sense Resistor Networks provide the specific accuracy and resistance values required for a wide range of current measuring instruments and circuits.
Type...
OSI Optoelectronics’ super linear duo-lateral position sensing detectors (PSDs) feature state of the art duo-lateral technology to provide a continuous analog output proportional to the displacement of the centroid of a light spot from...
670 nm Band Optimized; Active Area 11.5 to 957 mm2; AA Dimensions 5.3 x 2.2 to 30.94 x 30.94 mm; Rise Time 0.25 to 5.00 µs; Responsivity 0.35, 0.42 A/W; Capacitance 50 to 3,900 pF; Package TO-5, Plastic, Metal Special
OSI...
900 nm Band Optimized; Active Area 7, 50 mm2; AA Dia. 3.0, 8.0 mm; Rise Time 10 ns; Responsivity 0.47, 0.54 A/W; Capacitance 20, 125 pF; Package TO-5, TO-8
OSI Optoelectronics’ QD7-0-SD or QD50-0-SD sum and difference amplifier...
UV-NIR; 200-1160 nm; Resolution 0.06-20.0 nm; Sensitivity 250,000-1,200,000 Counts/µW per ms Integration Time; CCD Array Detector; Interface USB 2.0, USB 3.0, Gigabit Ethernet, RS-232; 175x110x44-250x179x144 mm
The AvaSpec SensLine...
The free software tool available from our partner Kryotherm allows to predict performance and select single or a set of thermoelectric modules in applications where thermal resistance values both on the hot and cold side are known...
4 Channels; 8,192 Sensors; Total Sensing Length 52 m; Spatial Resolution 1.6 mm; Temperature Measurement Range -270 to +1,200 °C
Sensuron’s Summit series of fiber optic distributed strain and temperature measurement systems brings...
8 Channels; 16,384 Sensors; Total Sensing Length 104 m; Spatial Resolution 1.6 mm; Temperature Measurement Range -270 to +1,200 °C
Sensuron’s RTS125+ series of fully ruggedized, compact fiber optic sensing system delivers reliable...
1 Channel; >2,000 Sensors; Total Sensing Length 13 m; Spatial Resolution 6.35 mm; Acquisition Time <10 s
Sensuron’s Static Strain fiber optic distributed strain measurement system is a low-cost, one-channel fiber optic...
Submersible Level Probes Floar Switches
The SLP is a single switch point liquid level probe, for use in water or aqueous liquids, designed to be suspended into the liquid by its cable. It can be configured to give make or break...
High Power Float Switches for Indoor or Covered Tanks
The MS Float Switch series is designed for use in non-turbulent water, with fairly constant ambient temperature, such as in indoor tanks or covered reservoirs. The switching...
Float Switches for Exposed Tanks or Turbulent Liquid
The FFSMC Float Switch series is suitable for open reservoirs and turbulent water and industrial wastewater. The switching element is self cleaning with 10 Amp contacts, and...
Float Switches for Turbulent Liquids and Confined Spaces
The LM series Float Switch is suitable for use in water, industrial wastewater and sewage, that can have wide variations of temperature. This compact design of switch is for...
Inline Flow Switches
The FS range of Flow Switches are reed switch based devices which are manufactured in Acetal resin. These switches are designed for use in liquid flow systems up to 10 Bar pressure. Advanced design ensures...
Plastic; Compact Internal Fitting Float Switches
The RSF40 series is designed as a compact internal fitting device, with a wide range of options, making this ideal for size sensitive applications. This Float Switch is fitted...
Plastic; Compact External Fitting Float Switches with 1/2'' Taper Thread
The RSF80 Float Switch series is designed for external fitting, achieved with a 1/2" NPT taper thread. This avoids the need for access to the inside of the...
Plastic; Internal Mount Drop Float Switches
The RSF10 series drop Float Switch has been designed to eliminate problems associated with limescale build up around the pivot point of a conventional float switch. It is also suitable in...
Plastic; Internal Mount Drop Float Switches for Low Level
The RSF20 Float Switch is designed to eliminate the problems associated with limescale build up around the pivot point on a conventional float switch.This particular series...
Plastic; High Power Internal Fitting Float Switches
The RSF30 Float Switch series is a range of higher power side entry, internally fitted devices. These may be used for directly switching some small loads of less than...
Plastic; Compact External Fitting Float Switches with Compression Seal
The RSF70 Float Switch series is designed for external fitting, achieved with a high grade compression seal. This avoids the need for access to the inside of...
Plastic; Compact Internal Mount Float Switches with Temperature Sensing
The TSF40 Float Switch series is a development of the established RSF40 series range of liquid level sensors. Incorporating a high specification thermistor,...
Stainless Steel; Compact Internal Fitting Float Switches
The SSF211 Float Switch series is a horizontally mounted switch that is fitted internally in the side of the tank, so requires access to the inside of the tank. The switch is...
Stainless Steel; Compact External Fitting 1/2'' NPT Taper Thread Float Switches
The SSF212 Float Switch series is a horizontally mounted switch that is mounted externally in the side of the tank, with a 1/2" NPT thread(can fit...
Stainless Steel; Miniature Internal Fitting Float Switches
The SSF213 Float Switch series is a miniature horizontally mounted switch that is fitted internally in the side of the tank, so requires access to the inside of the tank....
Stainless Steel; 3/4”NPT External Fitting Float Switches
The SSH66TE34 Float Switch series are very short float versions featuring 3/4Ã NPT threads, these devices are easily mounted without needing internal access to the...
Plastic; Dual Switch Point PPS Float Switches
The RSF66 Float Switch series has been specifically designed to offer the user a long reach float with a number of switching options to cater for a variety of system requirements....
Stainless Steel; Dual Switch Point Float Switches
The SSF67 has been designed to give the user a deep penetration float switch with a number of switching options, to cater for a wide variety of system requirements. Manufactured in...
Vertical Switches; Continuous Output Level Float Switches
This transducer will give an output of 4-20mA over a measuring span of up to 2500mm. The output changes from 4mA at low level to 20mA at high level. The transducer is top...
Polypropylene or 316L Stainless Steel Extension Tubes Float Switches
A range of extension tubes available in Polypropylene or SS 316L, which extend the reach of the various vertical float switches. Polypropylene tubes, with either...
Plastic; Compact Internal Fitting Mount Float Switches
The RSF50 Float Switch series are compact vertically mounted devices with a single switch point. Mounting is in the top or bottom of the tank from the inside, so requires...
Plastic; Variable Insertion Depth Float Switches
The RSF64EXS is a vertical float switch, with either normally open or normally closed (when the float is down) switching action, permanently coupled to a 300mm PVC tube. This...
Plastic; Vertical Fast Lift Float Switches
The LLF Float Switches are designed for applications where very low levels of liquid need to be detected. The float will lift in as little as 6mm liquid and in SG as low as 0.45.
Stainless Steel; Miniature Internal Fitting Float Switches
The SSF22 Float Switch series is a compact vertically mounted device designed to achieve reliable switching. Mounting is in the top or bottom of the tank from the inside,...
Stainless Steel; Miniature Internal Side Mount Float Switches
The SSF24 Float Switch series is a compact horizontally mounted device designed to achieve reliable switching. Mounting is in the side of the tank from the inside, so...
Stainless Steel; High Temperature Internal Fitting Float Switches
The SSF26 Float Switch series is a vertically mounted device designed to achieve reliable switching at higher temperatures. Mounting is in the top or bottom of the...
Stainless Steel; High Pressure Internal Fitting Float Switches
The SSF28 Float Switch series is a vertically mounted device designed to achieve reliable switching at higher pressures. Mounting is in the top or bottom of the tank...
Stainless Steel; High Pressure Side Mount Float Switches
The SSF29 Float Switch series is a side mount vertical switch designed to achieve reliable switching at higher pressures, up to 40 bar. Mounting is in the side of the tank...
These flow switches are designed for use in liquid flow systems at pressures up to 10 bar and temperatures up to +85ºC. The design is based around a moving magnet and a fixed reed switch with a low flow restriction. The...
The LLF40 series is designed as a compact internal fitting device, with a wide range of options, making this ideal for size sensitive applications. Mounting of this series requires access to the inside of the tank.
These devices...
The LLF70 series is designed for fitting through a tank wall from the outside, where access to the inside for fitting is not possible. These devices are particularly suitable for detecting low levels of liquids in the bottom of tanks...
The RSF66 float switch series is designed to offer a number of switching options to meet a variety of system requirements. These switches are manufactured in PPS (Polyphenylene Sulphide), which is compatible with a wide range of...
The RSF150 series are compact vertically mounted devices with a single switch point. Mounting is either from the top or bottom of a tank from the inside, so requires access to the inside of the tank.
These float switches have M12...
The RSF166 float switch series is designed to offer a number of switching options to meet a variety of system requirements. These float switches are manufactured in PPS (Polyphenylene Sulphide), which are compatible with a wide...
The RSF166P float switch series is designed to offer a number of switching options to meet a variety of system requirements. These float switches are manufactured in PPS (Polyphenylene Sulphide), which is compatible with a wide...
The TSF70 series is a compact external fitting device, with a high specification thermistor so capable of sensing both liquid level and temperature. Mounting of this series is with the use of a compression seal, so does not...
The TSF80 series is a compact external fitting device, via 1/2”NPT thread, with a high specification thermistor so capable of sensing both liquid level and temperature. The device is mounted through a 1/2”NPT boss, so does not...
The TSSF212 series is a compact external fitting device, via 1/2”NPT thread, with a high specification thermistor so capable of sensing both liquid level and temperature. The device does not require access to the inside of the...
Equipped with a special bracket, the Tutor steering control system for cable end float switches can be easily fixed directly on pumps, or wall fixed, or on pipework for steering the floating switch in narrow or confined spaces to avoid...
Switch for 3/4”NPT External Fitting
SSH66XE are externally mounted horizontal float switches with 3/4”NPT thread. The float is made of 316L Stainless Steel and the stem is made of 304 Stainless Steel. These devices are...
Functional cookies are absolutely necessary for the functionality of the web shop. These cookies assign your browser a unique, random ID to ensure your unhindered shopping experience across multiple page views.
Session Cookie:
The session cookie stores your shopping data across multiple page views and is therefore essential for your personal shopping experience.
Wish List / Cart:
The cookie makes it possible to make a wish list available to the user across sessions. This means that the wish list remains even across several browser sessions.
Device Assignment:
The device assignment helps the shop to ensure the best possible display for the currently active display size.
CSRF Token:
The CSRF token cookie contributes to your security. It strengthens the protection of forms against unwanted hack attacks.
Login Token:
The login token is used to recognize users across sessions. The cookie does not contain any personal data, but allows personalization across multiple browser sessions.
Cache Exception Cookie:
The cache exception cookie allows users to read individual content independently of the cache memory.
Cookies Active Check:
The cookie is used by the website to find out whether cookies are allowed by the site user's browser.
Cookie Settings:
The cookie is used to store the site user's cookie settings across multiple browser sessions.
Origin Information:
The cookie stores the originating page and the user's first visited page for further use.
Enabled Cookies:
Saves which cookies have already been accepted by the user the first time.
Marketing
Marketing Cookies dienen dazu Werbeanzeigen auf der Webseite zielgerichtet und individuell über mehrere Seitenaufrufe und Browsersitzungen zu schalten.
Facebook Pixel:
Das Cookie wird von Facebook genutzt um den Nutzern von Webseiten, die Dienste von Facebook einbinden, personalisierte Werbeangebote aufgrund des Nutzerverhaltens anzuzeigen.
Google AdSense:
Das Cookie wird von Google AdSense für Förderung der Werbungseffizienz auf der Webseite verwendet.
Tracking
Tracking cookies help the shop operator to collect and evaluate information about the behavior of users on their website.
Google Analytics:
Google Analytics is used to analyze website traffic. Statistics about website activity can be created and read.
Yandex Metrica:
Yandex Metrica Cookies werden zur der Datenverkehranalyse der Webseite eingesetzt. Dabei können Statistiken über Webseitenaktivitäten erstellt und ausgelesen werden.
Bing Ads:
Das Bing Ads Tracking Cookie wird verwendet um Informationen über die Aktivität von Besuchern auf der Website zu erstellen und für Werbeanzeigen zu nutzen.
This website uses cookies to ensure you get the best experience on our website.