Product information "BB-600-11 Variable Optical Attenuators"
Reflective Style, Manually (Screw) Controlled; Fiber Type SM, MM, PM; 400 to 1625 nm; Connector Type NTT-FC/PC, ST, SC, LC/PC, other; Attenuation up to 40, 60 dB
OZ Optics’ BB-600-11 series of compact PC board mountable, reflective style, variable attenuators with low backreflection can be used for C, L and S wavelength bands, with minimal changes in insertion loss. Reflector style housings are ideal for applications where the input and output fibers must be attached to the same side of the attenuator. Mounting holes provide easy attachment to PC boards and patch panels.
The BB-600-11 series of reflector style attenuators contain either a variable neutral density filter or a blocking plate depending on the attenuator version selected. The blocking style is ideal for high power (over 50 mW) applications, while the neutral density filter provides more uniform attenuation in multi mode applications. The attenuation is controlled by a turn screw on the side of the attenuator, which controls the position of the filter or plate.
Neutral Density Filter or High-power Versions Available
Rugged and Compact
Wide Wavelength Range
Single Mode and Multi Mode Fiber Versions
Low PDL and Wavelength Dependence
Mode Independent Attenuation in Multi Mode Applications with Neutral Density Filter Version
Wide Attenuation Range
Applications: Optical Power Equalization and Power Control for WDMs and Multi-channel Optically Amplified Networks; Telecommunications; CATV; LAN; Test and Measurement; Receiver Padding
Variable Optical Attenuators
Manufacturer Series Name:
Related links to "BB-600-11 Variable Optical Attenuators"