Fiber Connector Parts

Fiber Connector Parts Available From Stock
AMS Technologies carries various fiber connector parts from stock, compatible with our optical connector kits that allow connecting single mode (SM)multi mode (MM) and polarization maintaining (PM) optical fibers. While these optical connector kits contain a standard crimp and boot set for Ø 3.0 mm tubing, the fiber connector parts available here include strain relief boots as well as crimps suitable for Ø 2.0 mm or Ø 0.9 mm cable size.

Parts are available for many popular optical connector types like FC, SMA, LC, SC, or ST. For the fiber connector boots you can use the filters below to first select the connector type and cable size and then choose between up to six possible colours. Crimps are available with Ø 2.0 mm for different connector types.

If you should not identify the fiber connector parts available from stock that meet your requirements, please contact AMS Technologies

Related Products
Our portfolio of fiber connector kits  is completed with a range of corresponding female mating sleeves and adapters as well as a large array of cleaning tools.

AMS Technologies can also offer an end-to-end solution for the assembly and test of optical connectors that is exactly tailored to your requirements. In our broad portfolio you can find tools for stripping and cleaving your fibers,  the fiber into the connector, polishing, and finally testing your connector with microscopes, interferometers as well as handheld and automated test equipment measuring return loss.

Choose from our assembly and test equipment portfolio that ranges from manual tools for small batches to fully automated systems for high-volume manufacturing environments.

Definition
Boots for fiber optical connectors are used to reduce the mechanical strain and tension of the optical fiber at the connector's fiber entrance and to provide reliable kink protection. Boots also prevent contamination from entering the interior of the connector. Boots for fiber connectors are available in different colours, e.g. to enable a definite assignment of different optical fibers or fiber cables.

Crimps are sleeves (usually made of soft metal) that firmly grip the optical fiber during the crimping process and thus ensure a defined mechanical connection between the fiber and the fiber connector housing. For a perfect crimping process, crimps with exactly the right dimensions for the fiber used and the respective connector type must be used.

Alternative Terms: Fibre Connector Part; Crimp Sleeve; Strain Relief Boot; Fiber Plug Part; Fibre Plug Part

Fiber Connector Parts Available From Stock AMS Technologies carries various fiber connector parts from stock, compatible with our  optical connector kits that allow connecting single... read more »
Close window
Fiber Connector Parts

Fiber Connector Parts Available From Stock
AMS Technologies carries various fiber connector parts from stock, compatible with our optical connector kits that allow connecting single mode (SM)multi mode (MM) and polarization maintaining (PM) optical fibers. While these optical connector kits contain a standard crimp and boot set for Ø 3.0 mm tubing, the fiber connector parts available here include strain relief boots as well as crimps suitable for Ø 2.0 mm or Ø 0.9 mm cable size.

Parts are available for many popular optical connector types like FC, SMA, LC, SC, or ST. For the fiber connector boots you can use the filters below to first select the connector type and cable size and then choose between up to six possible colours. Crimps are available with Ø 2.0 mm for different connector types.

If you should not identify the fiber connector parts available from stock that meet your requirements, please contact AMS Technologies

Related Products
Our portfolio of fiber connector kits  is completed with a range of corresponding female mating sleeves and adapters as well as a large array of cleaning tools.

AMS Technologies can also offer an end-to-end solution for the assembly and test of optical connectors that is exactly tailored to your requirements. In our broad portfolio you can find tools for stripping and cleaving your fibers,  the fiber into the connector, polishing, and finally testing your connector with microscopes, interferometers as well as handheld and automated test equipment measuring return loss.

Choose from our assembly and test equipment portfolio that ranges from manual tools for small batches to fully automated systems for high-volume manufacturing environments.

Definition
Boots for fiber optical connectors are used to reduce the mechanical strain and tension of the optical fiber at the connector's fiber entrance and to provide reliable kink protection. Boots also prevent contamination from entering the interior of the connector. Boots for fiber connectors are available in different colours, e.g. to enable a definite assignment of different optical fibers or fiber cables.

Crimps are sleeves (usually made of soft metal) that firmly grip the optical fiber during the crimping process and thus ensure a defined mechanical connection between the fiber and the fiber connector housing. For a perfect crimping process, crimps with exactly the right dimensions for the fiber used and the respective connector type must be used.

Alternative Terms: Fibre Connector Part; Crimp Sleeve; Strain Relief Boot; Fiber Plug Part; Fibre Plug Part

Close filters
 
  •  
from to
Save
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
Products 18
1 From 2
No results were found for the filter!
KTSCBTSE9 Connector Boot
KTSCBTSE9 Connector Boot
Connector Boot; SC; Cable 0.9 mm; Beige
€0.45

Ready for shipping within 24 hours, 100 units on stock

KTFCBTSK2 Connector Boot
KTFCBTSK2 Connector Boot
Connector Boot; FC; Cable 2 mm; Black
€0.45

Ready for shipping within 24 hours, 100 units on stock

KTSCBTBL2 Connector Boot
KTSCBTBL2 Connector Boot
Connector Boot; SC; Cable 2 mm; Green
€0.45

Ready for shipping within 24 hours, 100 units on stock

KTFCBTSL9 Connector Boot
KTFCBTSL9 Connector Boot
Connector Boot; FC; Cable 0.9 mm; Green
€0.45

Ready for shipping within 24 hours, 100 units on stock

KTSCBTSB9 Connector Boot
KTSCBTSB9 Connector Boot
Connector Boot; SC; Cable 0.9 mm; Blue
€0.45

Ready for shipping within 24 hours, 100 units on stock

KTSTBTBY2 Connector Boot
KTSTBTBY2 Connector Boot
Connector Boot; ST/LC/SMA; Cable 2 mm; Yellow
€0.45

Ready for shipping within 24 hours, 100 units on stock

KTSCBTBE2 Connector Boot
KTSCBTBE2 Connector Boot
Connector Boot; SC; Cable 2 mm; Beige You may also need the connector crimp, check here...
€0.45

Ready for shipping within 24 hours, 100 units on stock

KTSTBTBK9 Connector Boot
KTSTBTBK9 Connector Boot
Connector Boot; ST/SMA; Cable 0.9 mm; Black
€0.45

Ready for shipping within 24 hours, 100 units on stock

KTSTBTBW2 Connector Boot
KTSTBTBW2 Connector Boot
Connector Boot; ST/LC/SMA; Cable 2 mm; White
€0.45

Ready for shipping within 24 hours, 100 units on stock

KTSCBTBB2 Connector Boot
KTSCBTBB2 Connector Boot
Connector Boot; SC; Cable 2 mm; Blue
€0.45

Ready for shipping within 24 hours, 100 units on stock

KTFCBTSK9 Connector Boot
KTFCBTSK9 Connector Boot
Connector Boot; FC; Cable 0.9 mm; Black
€0.45

Ready for shipping within 24 hours, 100 units on stock

KTSTBTBE2 Connector Boot
KTSTBTBE2 Connector Boot
Connector Boot; ST/LC/SMA; Cable 2 mm; Beige
€0.45

Ready for shipping within 24 hours, 100 units on stock

1 From 2
Viewed