SLC/MU USB & Manual LED Controllers

SLC_MU USB & Manual LED Controllers Mightex
  • SW11222
4 Channels; 12-24 VDC; 1,200 mA Per Channel; Interface USB; Current Resolution 1, 5 mA... more
Product information "SLC/MU USB & Manual LED Controllers"

4 Channels; 12-24 VDC; 1,200 mA Per Channel; Interface USB; Current Resolution 1, 5 mA

Mightex’s SLC/MU-Series of four-channel universal USB and manual LED controllers are designed to drive a broad range of LED light sources, and they offer the flexibility for users to operate each LED channel independently, both manually and through software. In addition, the LEDs can be driven both in Continuous Wave (CW) mode and in strobe mode. While the standard model (SLC-CA04-MU) provides 5 mA current resolution, a high-precision variant (SLC-MA04-MU) with 1 mA current resolution is also available.

The software comes with a user-friendly GUI that enables one to drive LEDs without the need to write any code. Furthermore, a full-featured SDK is provided in order for users to write their own software and to integrate the LED controllers into their own systems.

Manual Control: Each of the four channels can be operated manually in CW mode using a knob, and each knob is operated independently to control the output current of a specific channel. The LED controller also has a fifth knob (i.e. a “Global” knob) allowing to adjust the output current of all the channels at the same time and with the same step size. Therefore, first the intensities for the LED channels can be set – independently – using the four (small) knobs, and then the set intensities of all channels can be increased/decreased simultaneously using the “Global” knob.
In order to prevent LED damage due to ‘overdriving/overheating’, the maximum output current of each LED channel can be set individually, via the software provided with the LED controller, to match the current rating of the LED connected to the channel.

Software Control: SLC/MU-Series LED controllers can also be operated via a Windows-based application software, provided with the device. In software control mode, each channel can be individually configured by the software to operate in one of the following three modes:

  • Disable Mode: The channel is disabled, and its output is completely turned off
  • Normal Mode (or CW Mode): The output current is constant and can be adjusted (using software) from 0 to 1,200 mA through the USB interface
  • Strobe Mode: A Pulse-Width-Modulated (or PWM) periodic strobe pattern is output from the channel, which can be activated by a software trigger. The strobe pattern may last indefinitely or for a preset number of cycles, depending on the software setting. The maximum frequency of the PWM strobe is 500 Hz.

The LED controller also has a DC output used to control a cooling fan, usually used to cool down a high-power LED. The LED controller’s software allows one to control the speed of the cooling fan, through a designated variable PWM signal output.

Key Features:

  • Number of Channels: 4
  • Power Supply: 12 to 24 VDC
  • Per Channel Driving Current: Up to 1,200 mA
  • Current Monitoring Display
  • High Precision with 1 mA Current Resolution
  • Software/Manual Controlled
  • Computer-controllable: USB Interface
  • Dual Control Modes: DC and Strobe
  • Universal Driver – Suitable for Any LED
  • Capable of Driving Variable Loads
  • User-friendly Application Software With GUI
  • Full-featured SDK

Applications: Machine Vision; Displays; Semiconductor Equipment; Test Instruments; Microscopy; Medical Instruments

Product Group: LED Controllers
Manufacturer Series Name: SLC/MU USB & Manual
Related links to "SLC/MU USB & Manual LED Controllers"
Read, write and discuss reviews... more
Customer evaluation for "SLC/MU USB & Manual LED Controllers"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.

Top seller
in stock