SLB-1200-1 Manual & Analog-input LED Controllers

AMS item number: SW11220

1 Channel; 9-24 VDC; 1,200 mA Per Channel; Interface 0-5 V Analog Mightex’s SLB-1200-1... more

Product information "SLB-1200-1 Manual & Analog-input LED Controllers"

1 Channel; 9-24 VDC; 1,200 mA Per Channel; Interface 0-5 V Analog

Mightex’s SLB-1200-1 universal manual and analog-input LED controller is designed for driving a broad range of LED light sources.

The SLB-1200-1 LED controller has two control modes:

Manual Knob Control Mode: the current output of each channel can be adjusted manually
Analog Input Control Mode: the current output of each channel can be controlled via 0 to 5 V analog input

The control mode is set via a DIP switch, and the factory default setting is “Manual Knob Control Mode”. The controller also has a DIP switch for maximum current setting, which allows user to set the maximum current to 350, 750 or 1,200 mA, whichever applicable, in order to prevent LED damage due to overdriving. The factory default setting is 350 mA. When the maximum current setting DIP switch is set at a smaller value, the LED controller has a finer resolution for the output current.

When the SLB-1200-1 LED controller is set to “Analog Input Control Mode”, the output current is proportional to the voltage of the analog input signal.

Key Features:

Number of Channels: 2
Power Supply: 9 to 24 VDC
Maximum Driving Current: 1,200 mA
Dual Control Modes: Manual or Analog-input
Universal – Suitable for Any LED
Tiered Maximum Output Current Settings (i.e. 350, 750 and 1,200 mA) to Prevent Overdrive
Capable of Driving Variable Loads

Applications: Microscopy; Lighting; Machine Vision; Displays; Semiconductor Equipment; Test Instruments; Medical Instruments