SLA-Series Manual & Analog-input LED Controllers

SLA-Series Manual & Analog-input LED Controllers Mightex
 
  • SW11218
2 Channels; 9-24 VDC; 100-1,200 mA Per Channel; Interface 0-5 V Analog; Max. Modulation... more
Product information "SLA-Series Manual & Analog-input LED Controllers"

2 Channels; 9-24 VDC; 100-1,200 mA Per Channel; Interface 0-5 V Analog; Max. Modulation Frequency 1, 50 kHz

Mightex’s SLA-Series of two-channel universal manual and analog-input LED controllers are designed to drive a broad range of LED light sources.

SLA-Series LED controllers have two control modes:

  • Manual Knob Control Mode: the current output of each channel can be adjusted manually
  • Analog Input Control Mode: the current output of each channel can be controlled via 0 to 5 V analog input

The control mode is set via a DIP switch, and the factory default setting is “Manual Knob Control Mode”. The controllers also have a DIP switch for maximum current setting, which allows user to set the maximum current to different levels, in order to prevent LED damage due to overdriving. The factory default setting is 30 mA for SLA-0100-2, and 350 mA for both SLA-1000-2 and SLA-1200-2. When the maximum current setting DIP switch is set at a smaller value (e.g. 350 mA), the LED controller has a finer resolution for the output current.

When the SLA-Series controller is set to “Analog Input Control Mode”, the output current is proportional to the voltage of the analog input signal. The operational mode and the current limit of each channel can be set independently from each other.

Mightex’s SLA-Series of universal manual and analog-input LED controllers currently include three models in total:

 
Max. Per Channel Ouptut Current Max. Modulation Frequencyl
SLA-0100-2 100 mA 50 kHz 50 kHz
SLA-1000-2 1,000 mA 1 kHz
SLA-1200-2 1,200 mA 1 kHz

 

Key Features:

  • Number of Channels: 2
  • Power Supply: 9 to 24 VDC
  • Per Channel Driving Current: 100 to 1,200 mA
  • Dual Control Modes: Manual or Analog-input
  • Interface: 0-5 V Analog
  • Max. Modulation Frequency: 1, 50 kHz
  • Universal – Suitable for Any LED
  • Tiered Maximum Output Current Settings to Prevent Overdrive
  • Capable of Driving Variable Loads

Applications: Microscopy; Lighting; Machine Vision; Displays; Semiconductor Equipment; Test Instruments; Medical Instruments

Product Group: LED Controllers
Manufacturer Series Name: SLA-Series Manual & Analog-input
Related links to "SLA-Series Manual & Analog-input LED Controllers"
Read, write and discuss reviews... more
Customer evaluation for "SLA-Series Manual & Analog-input LED Controllers"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.

in stock
Top seller
in stock
Viewed