BG-RAMAN Raman Fiber Amplifier

AMS item number: SW11529

Fiber Type Single Mode SM 0.9 mm Loose or Tight Tube, Bare Fiber; 1425-1495 nm; Output Power... more

Product information "BG-RAMAN Raman Fiber Amplifier"

Fiber Type Single Mode SM 0.9 mm Loose or Tight Tube, Bare Fiber; 1425-1495 nm; Output Power 500 mW Typ.; Raman Gain 12 dB Typ.; Polarization Mode Dispersion ≤0.5 ps; Interface RS232

Beogold Technology's BG-RAMAN Raman fiber amplifier module can be used for optical signal amplification in ultra-long-haul and dense wavelength division multiplexing (DWDM) systems to increase transmission distance.

The module uses multi-pump laser multiplexer technology to achieve flat-gain, low-noise optical signal amplification across the C-band through a combination of different types of pump lasers and fiber type. For laser safety considerations, the module incorporates an automatic shut-down mechanism, which automatically turns off the laser output to ensure personal safety when incidents such as fiber breakage or line aging occur.

The module has built-in drive circuitry and logic control circuitry to monitor key information such as pump laser temperature and module temperature in real time.

All state parameters and configuration information can be flexibly adjusted and monitored by the upper computer control software. Default module state parameters can be provided according to specific order information and customer requirements. Module, table and rack mounted structures are available for different needs.

Key Features:

Pump Wavelength Range: 1425 nm to 1495 nm
High Pump Laser Output Power: 500 mW Typical
Raman Gain: 12 dB Typical
Polarization Mode Dispersion: ≤0.5 ps
Polarization Dependent Gain: ≤0.5 dB
High Reliability
High Stability
Excellent Thermal Adaptability: -20 °C to +60 °C Operating Temperature Range
Improved Signal-to-noise Ratio (SNR)
Module, Desktop and Rack-mounted Structures Available
Optical Fiber Interface: SM Pigtail (Module), FC/APC (Rack-mounted)
Communication Interface: RS232 Serial Port (Module), RS232 Console or RJ45 (Rack-mounted)
Power Supply: 5 VDC (Module), 220 VAC or 48 VDC (Rack-mounted)
Dimensions: 150 x 125 x 30.5 mm (Module), 1U (Rack-mounted)

Applications: Distributed Raman Amplification; Distributed Fiber Optic Sensing; Repeater-less Long-haul Fiber Optic Communication; 40G, 100G High-speed Optical Fiber Communication Systems