WLD3393 Evaluation Board

AMS item number: C006575-6

€287.50

Content: 1 pcs

Prices plus VAT plus shipping costs

Qty

Delivery time 15 workdays

The WLD3393 evaluation board is used with following laser diode drivers from Wavelength... more

Close menu

Product information "WLD3393 Evaluation Board"

The WLD3393 evaluation board is used with following laser diode drivers from Wavelength Electronics: WLD3343, WLD3343-3A, WLD3343-2L, WLD3343-3L or WLD3343HB. This evaluation board does not include the controller. Adjust laser diode forward current (Constant Current Mode) or monitor photodiode current (Constant Power Mode) using the 12-turn onboard current setpoint trimpot. Laser Diode current range (200 mA or 2 A) and Photodiode current range (200 µA or 2 mA) are configurable. It works with A, B, and C type laser diodes. A trimpot configures the laser diode forward current limit. A switch sets mode as either Constant Current or Constant Power. Power it through the terminal strip or using the 2.5 mm circular connector and the PWRPAK-5V, PWRPAK-7V, PWRPAK-9V, or PWRPAK-12V power supplies. The input cable set allows easy connection to your power supply and monitoring equipment while the output cable set quickly connects to your laser diode and monitor photodiode. High power applications can use the onboard fan connector to power a WXC303 or WXC304 (+5 V or +12 V DC fan) attached to a WHS302 heatsink. This driver board is widely used in electro-optic qualification, spectrometers, medical diagnostic equipment, range finders, and on research benches.

Key Features:

Operates all Laser Diode Pin Configurations
Two Configurable Output Current Ranges (200 mA or 2.0 Amps)
Constant Current or Constant Power Operation
Onboard Current Setpoint Trimpot
Adjustable Current Limit
Enable/Disable Switch and LED
Includes Input/Output Cable Set
Includes a Fan Connection
Easily Connects to an External Control Potentiometer or Voltage Source
Includes 2.5 mm jack input for use with PWRPAK power supplies