WFC-Series Multi-wavelength Fiber-coupled LED Light Sources

AMS item number: SW11216

Multi-wavelength LED Module; 365-980 nm; Typical Radiant Flux 0.07-19.2 mW; Iop 0.5-1 A; Vop... more

Product information "WFC-Series Multi-wavelength Fiber-coupled LED Light Sources"

Multi-wavelength LED Module; 365-980 nm; Typical Radiant Flux 0.07-19.2 mW; Iop 0.5-1 A; Vop 1.4-3.9 V

Mightex’s WFC-Series of multi-wavelength fiber-coupled LED light sources are enabled by the latest LED technologies, and Mightex’s proprietary beam combining and coupling optics. Up to eight LEDs are coherently combined into a single multi mode fiber with the highest efficiency practically possible. Each LED can be powered individually or simultaneously to produce a tuneable spectrum.

The WFC-Series LED light sources are offered in two configurations – standard and high-power. Neutral beam combiners are used in the standard configuration. The standard configuration has the advantage of low cost and the most flexible wavelength plans. Any wavelength and white colour may be combined in the standard configuration.

For applications that require the highest possible output power, however, one should choose the high-power configuration where high-efficiency dichroic beamsplitters are used to combine different wavelengths. Because not all possible dichroic beamsplitters are in stock, some wavelength combinations may require customization. Please contact AMS Technologies with your detailed wavelength plan to obtain a quotation for custom higher-power configurations.

A wide range of LED wavelengths from 365 to 980 nm and white colours are available for users to choose from. The selected LEDs are installed in the light source chassis in the factory. Fiber coupling is through a standard SMA port, and hence customers may use different fibers with the LED light source according to the specific requirements of their applications. SMA-connectorized fiber patchcords are available in various core diameters and numerical apertures.

A 4-channel light source includes a 5-ft electrical cable, and an 8-channel source includes two such cables. Each cable has an 8-pin locking connector on one end to be plugged into the light source, and four pairs of bare-wire terminals at the other end. Each pair of terminals should be connected to a separate channel of a LED controller.

Users can drive the installed LEDs individually or simultaneously using a Mightex multi-channel LED controller or other constant current sources. A cooling fan with heat sinks is built into the light source. When two or more wavelengths are running at full power, the fan should be turned on to maintain low temperature of the LED junctions, in order to prevent LED damage due to over-heating. A separate power supply is included for driving the cooling fan.

Mightex 4-channel multi-wavelength light source can be ordered with 2 and 4 wavelengths, and the 8-channel source can be ordered with 6 and 8 wavelengths. In the standard configuration (which is NOT supported by the 8-channel source due to low efficiency), output power of each wavelength decreases with the total number of wavelengths, while in the high-power configuration the output power does not change much with number of wavelengths.

Need a custom multi-wavelength fiber-coupled LED light source? Please contact the AMS Technologies LED light source experts to discuss your customized solution.

Key Features:

Combine 2, 4, 6 or 8 LEDs into a Single Fiber Output
No Moving Parts in Optical Path
Interchangeable Fiber With SMA Connector
Independent and simultaneous control of the LEDs
High-efficiency Dichroic Beam Combiners
High Output Power UV/VIS/NIR/White Fiber-coupled LEDs
Wide Range of Available Wavelengths: 365 to 980 nm (UV, VIS Visible, NIR Near Infrared), 4000 to 6500 K for White LED Versions
Typical Radiant Flux: 70 µW to 19.2 mW
Iop: 0.5 to 1 A
Vop: 1.4 to 3.9 V
Cooling Fan for Maximum Intensity Stability
Optional Multi-channel LED Controller

Applications: Optogenetics; General Purpose Light Source; Microscope Illuminator; Fast Spectrum Tuning