USB3.0 1.2MP CMOS Cameras

USB3.0 1.2MP CMOS Cameras Mightex
  • SW11208
1.2 MP; Pixel Size 3.75x3.75 µm; Sensor Size 1/3” Diagonal; Colour or B/W; 60-380 fps;... more
Product information "USB3.0 1.2MP CMOS Cameras"

1.2 MP; Pixel Size 3.75x3.75 µm; Sensor Size 1/3” Diagonal; Colour or B/W; 60-380 fps; Resolution 8, 12 bit; USB 3.0; Global Shutter; Progressive Scan; Dynamic Range 64 dB; Board-level or Enclosed

Mightex’s ultrafast USB 3.0, 1.2 MP, CMOS cameras are designed for applications that require high-speed and/or multiple cameras. These cameras are equipped with a super-speed USB3.0 interface that can deliver a transfer rate of up to 400 Mbytes per second, which is 10 times the USB2.0 speed, 3.5 times GigE speed and 6 times Firewire-800 speed.

With this series’ 1.2 Megapixel global shutter CMOS sensor, the frame rate can be as high as 44 fps in full resolution and up to 300 fps using ROI mode. Mightex USB 3.0 cameras are optimized for machine-vision applications, and they can also be used for a wide variety of other applications such as digital microscopy and medical imaging, where quality, ease of use, and cost-effectiveness are crucial.
These cameras have external trigger-in, strobe-out, and a powerful camera engine that supports multiple cameras. In addition, a user-friendly GUI based application software and an SDK are provided for custom software development.

USB3.0 1.2 MP CMOS cameras are available as colour (SMN-C012-U/SME-C012-U) or B/W (SMN-B012-U/SME-B012-U) versions and can be ordered as “naked” board-level device (SMN) or pre-mounted in an enclosure (SME).

Note: Board-level cameras are designed for OEM applications, when a system-level enclosure is usually provided. In order to avoid electro-static discharge (ESD) related damages, workforce handling a board-level camera should be properly grounded. ESD related damages are considered as mishandling and are not covered by product warranty. For lab use, it is strongly recommended to choose an enclosed camera instead of a board-level one.

Key Features:

  • Colour or Black&White (B/W, Monochrome)
  • Board-level or Enclosed Versions Available
  • Ultra-compact
  • Interface: Super-speed USB 3.0 (5 Gbit/s), No Need for External Power Supply
  • Support Simultaneous Image Capturing From Multiple Cameras
  • Active Imaging Pixels: 1.2 MP (1280x960)
  • Pixel Size: 3.75 x 3.75 µm
  • Sensor Size (Diagonal): 1/3”
  • Global Shutter
  • Dynamic Range: 64 dB
  • Gray Level: 8, 12 bit
  • Progressive Scanning System
  • Frame Rate: 60 to 380 fps
  • 4-pin GPIOs
  • Simpler Data Processing
  • Digital Output, No Need for Frame Grabber
  • Custom Programmable With SDK Provided
  • DirectShow & TWAIN Drivers
  • External and Software Trigger
  • Strobe Output for External Flash
  • ROI and Pixel Skipping/Binning
  • OEM Versions Available

Applications: Machine Vision Systems; Medical Imaging and Engineering; Semiconductor Equipment; Document Scanners; Digital Microscopy; Web Camera and Security Video; Test Instruments; High-quality ID Photo Capture; 2D Barcode Readers

Product Group: CMOS Cameras
Manufacturer Series Name: USB3.0 1.2MP
Related links to "USB3.0 1.2MP CMOS Cameras"
Read, write and discuss reviews... more
Customer evaluation for "USB3.0 1.2MP CMOS Cameras"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.

Top seller
in stock