Cabinet Coolers

Cool electronics to slightly above the outside ambient air temperature with our air-to-air models. Air is circulated inside the cabinet to keep hot spots from forming. Flange and neoprene gasket keep contaminants out - ideal for dusty and dirty environments. No outside air enters the enclosure. Corrosion resistant coatings and optional stainless steel construction protect against damage from harsh or corrosive environments. Easy to install on the top, sides, front or back of your panel or enclosure. One person can easily install in one hour in most applications. Energy efficient and low power requirement, no new electrical is needed.

AMS Technologies releases the first version of its online tool enabling thermal designers to quickly dimension cabinet coolers. The tool has been developed to allow users to quickly determine, which cooling technology, such as heat pipes, TEC or compressors can be used for their requirements and chose from a large selection of AMS Technologies’ standard cabinet coolers. 

The use of the calculator is free of charge and can be found at 

Cool electronics to slightly above the outside ambient air temperature with our air-to-air models. Air is circulated inside the cabinet to keep hot spots from forming. Flange and neoprene gasket... read more »
Close window
Cabinet Coolers

Cool electronics to slightly above the outside ambient air temperature with our air-to-air models. Air is circulated inside the cabinet to keep hot spots from forming. Flange and neoprene gasket keep contaminants out - ideal for dusty and dirty environments. No outside air enters the enclosure. Corrosion resistant coatings and optional stainless steel construction protect against damage from harsh or corrosive environments. Easy to install on the top, sides, front or back of your panel or enclosure. One person can easily install in one hour in most applications. Energy efficient and low power requirement, no new electrical is needed.

AMS Technologies releases the first version of its online tool enabling thermal designers to quickly dimension cabinet coolers. The tool has been developed to allow users to quickly determine, which cooling technology, such as heat pipes, TEC or compressors can be used for their requirements and chose from a large selection of AMS Technologies’ standard cabinet coolers. 

The use of the calculator is free of charge and can be found at 

Close menu
from to
  •  
  •  
  •  
1 From 3
DEK 04 Cooling unit for roof mounting – Cooling Capacity 410 Watt
DEK 04 Cooling unit for roof mounting – Cooling Capacity 410 Watt
Series DEK: Cooling units for roof mounting Cooling capacity from 410W up to 4050W Available for different voltages Advantages: quick assembly, reliability and minimised maintanance
Unit of measure 1 pcs
€897.00
TRP 260 - Temperature Controller for TEC Cabinet Cooler
TRP 260 - Temperature Controller for TEC Cabinet Cooler
Temperature control TRP 260 – Article number: 45 TRP 260 Supply voltage: 24 V DC Max. switching capacity : 16 A (bei 24V DC) Temperature range: 0 bis +60°C Measuring and indicating accuracy: 0,5°C Hysteresis for heating and cooling : 0,5...
Unit of measure 1 pcs
€197.00
TRP 205 - Temperature Controller for TEC Cabinet Cooler
TRP 205 - Temperature Controller for TEC Cabinet Cooler
Thermostat TRP 205 – Article number: 45 TRP 205 Temperature controllers with bimetallic or capillary sensors Electronic temperature controllers Humidity controllers Speed controllers Protection of electronics against heat, coldness and...
Unit of measure 1 pcs
€81.00
Emparro 20 - Power Supply 20A for TEC Cabinet Cooler
Emparro 20 - Power Supply 20A for TEC Cabinet Cooler
Emparro 20 – Article number: 42 20a 500 Single phase, primary switch mode Stabilized output voltage Short circuit and overload protected Input voltage range 90 – 265 V AC DIN – rail mounting to EN 50022 Input voltage 85- 265V 50/60Hz...
Unit of measure 1 pcs
€195.00
Emparro 10 - Power Supply 10A for TEC Cabinet Cooler
Emparro 10 - Power Supply 10A for TEC Cabinet Cooler
Emparro 10 – Article number: 42 10A 500 Single phase, primary switch mode Stabilized output voltage Short circuit and overload protected High efficiency DIN – rail mounting to EN 60715 Input voltage 85- 265V 50/60Hz Input current 1,1A...
Unit of measure 1 pcs
€145.00
Emparro 5 - Power Supply 5A for TEC Cabinet Cooler
Emparro 5 - Power Supply 5A for TEC Cabinet Cooler
Emparro 5 – Article number: 42 05a 500 Single phase, primary switch mode Stabilized output voltage Short circuit and overload protected Input voltage range 90 – 265 V AC DIN – rail mounting to EN 50022 Input voltage 85- 265V 50/60Hz...
Unit of measure 1 pcs
€130.00
TRS 60 - Temperature Controller
TRS 60 - Temperature Controller
Thermostat TRS 60 – Article number: 15 TRS 060 Temperature controllers with bimetallic or capillary sensors Electronic temperature controllers Humidity controllers Speed controllers Protection of electronics against heat, coldness and...
Unit of measure 1 pcs
€12.00
SKY 10 Cooling unit for door or wall mounting – Cooling Capacity 1050 Watt
SKY 10 Cooling unit for door or wall mounting – Cooling Capacity 1050 Watt
Series EGO: Cooling units for door or wall mounting Drilling templates and mounting accessories are included in the package. They are all designed to ensure easy and safe wiring with the terminal board located at the back of the unit...
Unit of measure 1 pcs
€1,048.00
EGO 08 Cooling unit for wall mounting – Cooling Capacity 820 Watt
EGO 08 Cooling unit for wall mounting – Cooling Capacity 820 Watt
Series EGO: Cooling units for door or wall mounting Drilling templates and mounting accessories are included in the package. They are all designed to ensure easy and safe wiring with the terminal board located at the back of the unit...
Unit of measure 1 pcs
€984.00
DEK 08 Cooling unit for roof mounting – Cooling Capacity 820 Watt
DEK 08 Cooling unit for roof mounting – Cooling Capacity 820 Watt
Series DEK: Cooling units for roof mounting Cooling capacity from 410W up to 4050W Available for different voltages Advantages: quick assembly, reliability and minimised maintanance
Unit of measure 1 pcs
€1,122.00
EGO 06 Cooling unit for wall mounting – Cooling Capacity 640 Watt
EGO 06 Cooling unit for wall mounting – Cooling Capacity 640 Watt
Series DEK: Cooling units for roof mounting Cooling capacity from 410W up to 4050W Available for different voltages Advantages: quick assembly, reliability and minimised maintanance
Unit of measure 1 pcs
€898.00
EGO 04 Cooling unit for wall mounting – Cooling Capacity 380 Watt
EGO 04 Cooling unit for wall mounting – Cooling Capacity 380 Watt
Series EGO: Cooling units for door or wall mounting Drilling templates and mounting accessories are included in the package. They are all designed to ensure easy and safe wiring with the terminal board located at the back of the unit...
Unit of measure 1 pcs
€665.00
1 From 3
Viewed