Solderable Chip Si Photodiodes

AMS item number: SW11058

970 nm Band Optimized; Active Area 4.7 to 189.0 mm2; AA Dimensions 1.7 x 2.8 to 9.2 x 20.7 mm;... more

Product information "Solderable Chip Si Photodiodes"

970 nm Band Optimized; Active Area 4.7 to 189.0 mm2; AA Dimensions 1.7 x 2.8 to 9.2 x 20.7 mm; Responsivity 0.60, 0.65 A/W; Capacitance 15 to 17,000 pF; Package Solderable Chip

OSI Optoelectronics’ solderable silicon photodiode chip series offer a low-cost approach to applications requiring large active area photo detectors with or without flying leads for ease of assembly and/or situations where the detector is considered "disposable".

They have low capacitance, moderate dark currents, wide dynamic ranges and high open circuit voltages. These detectors are available with two 76 mm long leads soldered to the front (anode) and back (cathode).

The photoconductive solderable series (SXXCL) is used for low-capacitance and fast-response applications, while the photovoltaic solderable series (SXXVL) is used for low-noise applications.

All devices are also available in chip form without any leads. For ordering subtract suffix 'L' from the model number, e.g. “S-100C”.

For large signal outputs, the detectors can be connected directly to a current meter or across a resistor for voltage measurements. Alternately, the output can be measured directly with an oscilloscope or with an amplifier. For further details please refer to the application note “Photodiode Characteristics and Applications” available under “Downloads”.

Key Features:

Large Active Area
Various Sizes
High Shunt Resistance
With or Without Leads

Applications: Solar Cells; Low-cost Light Monitoring; Diode Laser Monitoring; Low Capacitance

Product Group:

Solderable Chip Si Photodiodes

Related links to "Solderable Chip Si Photodiodes"