PWRPAK Power Supplies for Laser Drivers & TEC Drivers

AMS item number: SW10835

AC/DC Power Supplies for Laser Drivers & TEC Drivers; Input Voltage 90 (100) to 240 (264) VAC;... more

Product information "PWRPAK Power Supplies for Laser Drivers & TEC Drivers"

AC/DC Power Supplies for Laser Drivers & TEC Drivers; Input Voltage 90 (100) to 240 (264) VAC; Output Voltage 5 to 24 VDC; 18 to 132 W; Termination 2.1, 2.5 mm Ø, Open-ended

One of the most important components affecting noise performance is the power supply used to power the laser driver. A linear supply will offer lower noise, but a much larger size and lower efficiency.

For their laser diode, QCL laser and TEC driver series, Wavelength Electronics offers the PWRPAK series of low noise switched power supplies with voltages ranging from 5 to 24 V and currents ranging from 2 to 13 A. These power supplies operate off 90 to 264 VAC or 100 to 240 VAC with 47 to 63 Hz:

PWRPAK-5V drives up to 8 A at 5 VDC
PWRPAK-13A-5V drives up to 13 A at 5 VDC. The end is unterminated for use with the LD10CHA, LD15CHA, PLD12.5K-CH, PLD10K-CH or PTC10K-CH. It can power the PLD12500 or PLD10000 when used with the PLD10EV evaluation board or the PTC10000 when used with the PTCEVALPCB.
PWRPAK-7V drives up to 3.0 A at 7.2 VDC
PWRPAK-9V drives up to 3 A at 9 VDC
PWRPAK-12V drives up to 2.5 A at 12 VDC
PWRPAK-11A-12V drives up to 11 A at 12 VDC. The end is unterminated for use with the LD10CHA, PLD12.5K-CH, PLD10K-CH, or PTC10K-CH. It can power the PLD12500 or PLD10000 when used with the PLD10EV evaluation board or the PTC10000 when used with the PTCEVALPCB.

PWRPAK-24V drives up to 2 A at 24 VDC. It has been tested with Wavelength Electronics’ QCL OEM and QCL OEM(+) series of low noise quantum cascade laser drivers. A wiring kit is available to simplify setup.

PWRPAK-16A-5V drives up to 16 A at 5V with 80% efficiency. This low noise switched power supply for the LD15CHA and LD10CHA series of laser diode drivers offers enough current and voltage to operate the LD15CHA series in single supply operation. It has a 5 V output to power the control electronics and provide up to 3 V to the laser. The 16 A current output covers the entire current range of LDxCHA series’ models. An additional wiring kit makes connections easy.

PWRPAK power supplies with 5 to 12 V output can be used with:

HTC1500 1.5 A Low Profile OEM Temperature Controller (PWRPAK-5V to PWRPAK-12V)
HTC1500-62 1.5 Amp Low Profile OEM Temperature Controller (PWRPAK-5V to PWRPAK-12V)
HTC3000 3 A Low Profile OEM Temperature Controller (PWRPAK-5V to PWRPAK-12V)
HTC3000-62 3 A Low Profile OEM Temperature Controller (PWRPAK-5V to PWRPAK-12V)
HTC4000-62 4 A Low Profile OEM Temperature Controller (PWRPAK-5V to PWRPAK-12V)
LD2.5CHA 2.5 A / 30 V Laser Diode Driver (PWRPAK-5V to PWRPAK-12V)
LD5CHA 5 A / 30 V Laser Diode Driver (PWRPAK-5V)
LD10CHA 10 A / 30 V Laser Diode Driver (PWRPAK-11A-12V, PWRPAK-13A-5V, PWRPAK-16A-5V)
LD15CHA 15 A / 30 V Laser Diode Driver (PWRPAK-13A-5V, PWRPAK-16A-5V)
PID1500 1.5 A Temperature Controller (PWRPAK-5V to PWRPAK-12V)
PLD200 200 mA Laser Diode Driver, PCB (PWRPAK-5V)
PLD500 500 mA Laser Diode Driver, PCB (PWRPAK-5V)
PLD1250 1.25 A Laser Diode Driver, PCB (PWRPAK-5V)
PLD5000 5 A Laser Diode Driver, PCB (PWRPAK-5V)
PLD6500 6.5 A Laser Diode Driver, PCB (PWRPAK-5V)
PLD10000 Laser Diode Driver – 10 A, PCB Mount (PWRPAK-11A-12V, PWRPAK-13A-5V)
PLD10K-CH 10 A Laser Diode Driver, Chassis Mount (PWRPAK-11A-12V, PWRPAK-13A-5V)
PLD12500 Laser Diode Driver – 12.5 A, PCB Mount (PWRPAK-11A-12V, PWRPAK-13A-5V)
PLD12.5K-CH 12.5 A Chassis Mount Laser Driver (PWRPAK-11A-12V, PWRPAK-13A-5V)
PTC5000 5 A PCB-Mount Temperature Controller (PWRPAK-5V)
PTC10000 10 A PCB-Mount Temperature Controller (PWRPAK-5V, PWRPAK-11A-12V)
PTC10K-CH 10 A Temperature Controller, Chassis Mount (PWRPAK-11A-12V, PWRPAK-13A-5V)
PTC10K-SL Booster for PTC Temperature Controller (PWRPAK-11A-12V, PWRPAK-13A-5V)
WTC3293-14001 2.2 A Temperature Controller (PWRPAK-7V to PWRPAK-12V)

PWRPAK-24V can be used with all QCL OEM and QCL OEM(+) series of quantum cascade laser drivers.

Key Features:

Output Current: 2, 2.5, 3, 8, 11, 13 A
Output Voltage: 5, 7.2, 9, 12, 24 VDC
Input Voltage: 90 to 264, 100 to 240 VAC, 47-63 Hz
Input Ripple & Noise: 1% Peak-to-peak, 240 mV (PWRPAK-24V)
Maximum Load Regulation: 192 mV (PWRPAK-24V)
Termination: 2.1 mm Ø With 2.5 mm Adapter Added, 2.5 mm Ø, Open-ended
Dimensions: 50 x 110 x 20 mm to 78 x 168 x 44.5 mm
Certifications: CE Mark Approved to UL, GS and TUV Safety Standards

Applications: Powering Wavelength Electronics’ Laser Diode, QCL Laser and TEC Driver Series