MPT10000 Rev G TEC Driver

MPT10000 Rev G TEC Driver
 
  • 6174140
€485.00
Content: 1 pcs

Prices plus VAT plus shipping costs

 
Qty

Ready for shipping within 24 hours, 1 unit on stock

10 A; 1 channel; 15 V; The robust MPT series circuitry achieves 0.005°C temperature... more
Product information "MPT10000 Rev G TEC Driver"

10 A; 1 channel; 15 V;

The robust MPT series circuitry achieves 0.005°C temperature stability. It is a chassis mount package with cabling to the male DSub15 connector available: WCB101. The MPT10000 drives up to 10 A for either Thermoelectrics (bipolar) or Resistive Heaters (unipolar).

This temperature controller interfaces with virtually any type of temperature sensor. An onboard sensor bias current source can drive thermistors, RTDs, or the LM335. For current sensors like the AD590, simply bias it and drive it into the sensor input. A trimpot adjusts the Proportional Gain (P). A fixed Integrator Time Constant (I) capacitor can be custom fit to your application to optimize temperature overshoot and stability. Another trimpot adjusts the setpoint temperature. You can use a remote signal (D-to-A, or remote trimpot, for example) with the external analog input to control the operating temperature. Up to 25 V can be delivered to the load with 30 V input. Heatsinking then becomes critical and a Safe Operating Area tool is available to make sure you don’t exceed the maximum internal power dissipation of the package. Monitor pins bring out both Setpoint and Actual temperature signals. Current limit is set via a single-turn trimpot under the cover.

Product Group: TEC Drivers
Related links to "MPT10000 Rev G TEC Driver"
Read, write and discuss reviews... more
Customer evaluation for "MPT10000 Rev G TEC Driver"
Write an evaluation
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.

Manufacturer Series
Viewed