MM50BI-OM2-MT Acrylate Coated MM Fiber

€4.43

Content: 1 meter

Qty

Ready for shipping within 24 hours, 100 units on stock

850-1310 nm; bend insensitive; Max Operating Temperature 150 °C; Core Diameter 50 µm; Coating... more

Product information "MM50BI-OM2-MT Acrylate Coated MM Fiber"

850-1310 nm; bend insensitive; Max Operating Temperature 150 °C; Core Diameter 50 µm; Coating Outside Diameter 245 µm

Multi mode mid-temperature specialty optical fibers for harsh environments; non hermetic.

Key optical specifications

Operating Wavelength (nm)	850, 1060, 1300
Cutoff Wavelength (nm)	n/a
Maximum Attenuation (dB/km)	2.5 @ 850 nm
	0.7 @ 1300 nm
Bandwidth (MHz-km) @ 850 nm High Performance EMB	950
Bandwidth (MHz-km) @ 850 nm Legacy Performance OFL	700
Bandwidth (MHz-km) @ 1300 nm Legacy Performance OFL	500
Numerical Aperture	0.20 ± 0.015

Key geometric, mechanical and environmental specifications

Core Diameter (µm)	50
Cladding Outside Diameter (µm)	125
Coating Outside Diameter (µm)	245*
Core-to-Cladding Offset (µm)	≤ 1.5
Standard Lengths	500 m, 1 km, 2 km, 5 km
Proof Test (kpsi)	100
Operating Temperature (°C)	-60 to 150
Coating	Mid-Temperature Acrylate Optional Hermetic Layer
* 200 μm also available for 150° only

Performance characteristics (values in this table are nominal or calculated)

Refractive Index Profile	Graded Index
Bend Loss (7.5 mm radius; 2 turns) (total induced attenuation)	≤ 0.2 @ 850 nm
	≤ 0.50 @ 1300 nm
Recommended Minimum Bending Radius (mm)	7.5

Maximum Operating Wavelength :	1300 nm
Specialty:	bend insensitive
Minimum Operating Wavelength :	850 nm
Maximum Operating Temperature :	150°C
Core Diameter :	50 µm
Coating Outside Diameter :	245 μm
Cladding Outside Diameter :	125 μm
Minimum Operating Temperature :	-60°C