High-Precision Optical Adhesives

AMS item number: SW11652

Viscosity 36,000, 180,000 mPas; Bending Adhesion Strength >114, >128 kgf/cm²; UV Curing... more

Product information "High-Precision Optical Adhesives"

Viscosity 36,000, 180,000 mPas; Bending Adhesion Strength >114, >128 kgf/cm²; UV Curing Conditions 100 mW/cm², 2 min; Curing Shrinkage Rate 0.5%, 0.9%; Tg +195, +233 °C; Thermal Expansion Coefficient 18, 20 ppm/°C

NTT-AT’s high-precision optical adhesives allow easy fixation of optical components with sub-micron accuracy. Based on epoxy, these high-precision optical adhesives are available with low viscosity of 36,000 mPas (AT3916P) or with high viscosity of 180,000 mPas (AT3862P). Both adhesives show minimal position changes due to curing time and temperature.

Shrinkage rate during curing is very low for this series of high-precision optical adhesives, and the thermal expansion coefficient is small. Using ultraviolet (UV) ray curing makes alignment easy.

NTT-AT’s series of high-precision adhesives show excellent durability: Even after a high-temperature process at +260 °C, the adhesives’ bonding strength does not change. And no peeling occurred after 200 cycles in a simplified heat cycle test.

In order to achieve high reliability, a product must clear the tests conducted by the users themselves. If you have had even just a bit of dissatisfaction in precision or durability results in the past, please put NTT-AT’s high-precision adhesives to the test.

In case you need any consulting regarding issues related to adhesion, please contact the AMS Technologies optical adhesives experts to discuss the detailed challenges of your application.

Key Features:

Low Shrinkage Rate During Curing: 0.5% (AT3862P), 0.9% (AT3916P)
Low Thermal Expansion Coefficient: <20 ppm/°C
Ultraviolet (UV) Curing for Easy Alignment
Excellent Durability: No Change in Bonding Strength After +260 °C High-temperature Process, No Peeling After 200 Heat Test Cycles
Viscosity: 36,000, 180,000 mPas
Bending Adhesion Strength: >114, >128 kgf/cm²
UV Curing Conditions: 100 mW/cm², 2 min
Glass Transition Temperature Tg: +195, +233 °C

Applications: High-precision Fixation of Optical Components With Sub-micron Accuracy

Product Group:

High-Precision Optical Adhesives

Related links to "High-Precision Optical Adhesives"

Further products by NTT-AT

Additional Downloads

High-Precision Optical Adhesives NTT-AT Datasheet Optical-Adhesives-Lineup-NTT-AT-Brochure Optical Adhesives AMS Technologies Brochure

Read, write and discuss reviews... more

Close menu

Customer evaluation for "High-Precision Optical Adhesives"

Write an evaluation

Evaluations will be activated after verification.

The fields marked with * are required.

NOA 84 Optical Adhesive 1oz bottle