Hertzstück™ PbS/PbSe NIR Detector Evaluation Kits

Hertzstueck PbS Bare Chip & Module Line Array NIR Detectors trinamiX
 
  • SW11642
Single-Pixel, Multi-Pixel, Line Array Versions; No. of Pixels/Channels 2-256; Detector Bias... more
Product information "Hertzstück™ PbS/PbSe NIR Detector Evaluation Kits"

Single-Pixel, Multi-Pixel, Line Array Versions; No. of Pixels/Channels 2-256; Detector Bias Voltage 10 V, Adjustable; Sampling Frequency 0.001-48 kHz; Interface USB

Three different trinamiX evaluation kits enable users to easily compare different varieties of the Hertzstück™ NIR detectors and to quickly develop circuit designs for their applications. All evaluation kits are powered and controlled directly over USB and do not need any additional external power supply.

The single-pixel evaluation kit offers two sockets for trinamiX Hertzstück™ PbS and PbSe single-pixel NIR detector developer boards in simultaneous operation. These are available for bonded bare chip detectors as well as TO5 package.

Hertzstueck-PbS_PbSe-NIR-Detector-Evaluation-Kits-trinamiX-II

Featuring two input channels, 48 kHz sampling rate and 16 bit resolution, the single-pixel evaluation kit can be powered and controlled directly over USB. All supply voltages are created on-board ensuring noise-free biasing and operation without the need for external precision voltage sources: a true plug-and play solution.

The evaluation kit includes analysis software performing real-time FFT (Fast Fourier Transform) and statistics analysis. Hence the kit directly determines signal and noise characteristics of the sensors, stores measurement data and characterizes detectivity and responsivity with an easy-to-use interface.

The multi-pixel evaluation kit provides a quick and cost-effective way to assess the capabilities of trinamiX’ Hertzstück™ PbS and PbSe multi-pixel infrared detectors up to 16 pixels as well as trinamiX Hertzstück™ PbS and PbSe multi-single-pixel detectors, with line or matrix geometry.

The multi-pixel evaluation kit comes with both a detailed user manual and user-friendly software, which allows for the easy capture of raw data for further analysis as well as for development of the target detection application. Customers can perform a thorough evaluation of the multi-pixel detectors without the need to develop a read-out circuit and software. This can shorten the end-product development process as well as enable better informed decisions on hardware design and component requirements.

Also, for customers with limited experience with photoconductive detectors, the circuit used in the multi-pixel evaluation kit provides the optimal starting point for a fast end-product development. The Multi-Pixel evaluation kit consists of the main PCB (printed circuit board) and an adapter PCB which is plugged into the main PCB at the intended pin socket and can, for instance, be customized to directly fit into a prototype system of the customer.

The line array evaluation kit enables users to easily test the Hertzstück™ bare chip and module line array detectors with 256 pixels and to quickly develop circuit designs for their applications.

Hertzstueck-PbS_PbSe-NIR-Detector-Evaluation-Kits-trinamiX-III

Users can adjust the PID values of the on-board thermoelectric controller (TEC). Charge well size is selectable from 1 to 20 pF, and the sampling frequency can be varied from 1 to 1024 Hz, with integration time between 4 µs and 200 ms.

The kit includes analysis software performing real-time FFT (Fast Fourier Transform) and statistics analysis.

Key Features:

  • Suitable For trinamiX Hertzstück™ PbS and PbSe Detectors
  • Plug and Play
  • Supplied by USB Power
  • Power Supply Voltage: 5 VDC
  • Read-out and Data Analysis With Standalone Measurement Software
  • No. of Pixels/Channels: 2 to 256
  • Detector Bias Voltage: 10 V, Adjustable (Line Array Version)
  • Sampling Frequency: 1 Hz to 48 kHz
  • On-board Temperature Sensor (Multi-Pixel Version)
  • On-board TEC Controller With Adjustable PID Values (Line Array Version)
  • Selectable Charge Well Size: 1 pF to 20 pF (Line Array Version)
  • Selectable Integration Time: 4 µs to 200 ms (Line Array Version)

Applications: Evaluation of trinamiX Hertzstück™ PbS/PbSe Single-Pixel, Multi-Single-Pixel, Multi-Pixel and Line Array NIR Detectors

Product Group: PbS Bare Chip & Module Line Array NIR Detectors
Manufacturer Series Name: Hertzstück™
Related links to "Hertzstück™ PbS/PbSe NIR Detector Evaluation Kits"
Read, write and discuss reviews... more
Customer evaluation for "Hertzstück™ PbS/PbSe NIR Detector Evaluation Kits"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.

Viewed