FST-001 Fiber Stretcher

FST-001 Fiber Stretcher General Photonics
  • SW11303
1260-1650 nm; Delay Range >3 mm; RL >65 dB; Fiber Type SMF-28, Other; IL General... more
Product information "FST-001 Fiber Stretcher"

1260-1650 nm; Delay Range >3 mm; RL >65 dB; Fiber Type SMF-28, Other; IL <0.2 dB; PDL <0.05 dB

General Photonics’ FST-001 is a piezo-driven fiber stretcher with an optical delay range of up to 3 mm. The device, including the piezo driver, is packaged in a metal enclosure.

Each of the FST-001 fiber stretcher’s four piezos can be controlled independently, allowing high resolution or large stroke. Piezos can be controlled with an analog signal or a 12-bit TTL signal.

Under analog control, the driving circuit acts as a 4-channel voltage amplifier with 30V/V amplification. Alternatively, the output voltage can be controlled by a computer equipped with a digital I/O card, or by a microprocessor.

Key Features:

  • Large Optical Path Delay Range: >3 mm (In Air)
  • High Speed
  • Low Insertion Loss (IL): <0.2 dB
  • Analog and Digital Control
  • Analog Input: 4 Channels, 4.7 V Maximum For Each Channel
  • Digital Input: 20-pin Connector, 12-bit TTL Control Signal
  • Operating Wavelength: 1260 to 1620 nm
  • Maximum Optical Power: 1,000 mW
  • Phase Change Sensitivity: 810 π/V
  • Internal Voltage Amplification: 30 V/V
  • Maximum Voltage on Piezo: 140 V
  • Resonance Frequency: 2.2 ±0.3 kHz
  • Return Loss (RL): >65 dB
  • Polarization Dependent Loss (PDL): <0.05 dB
  • Fiber Type: SMF-28, Other on Request
  • Dimensions: 170 x 106 x 39 mm

Applications: Sensors; Interferometers; Medical Imaging; Spectrum Analysis; OCT

Product Group: Fiber Stretcher
Manufacturer Series Name: FST-001
Related links to "FST-001 Fiber Stretcher"
Read, write and discuss reviews... more
Customer evaluation for "FST-001 Fiber Stretcher"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.