Product information "DBR Single Frequency Laser Diodes"
632, 633 nm; Typ. Linewidth 1.0 MHz; Max. Output Power 10 mW CW; Threshold Current ≤120 mA; Slope Efficiency 0.4 W/A; Side Mode Suppression Ratio ≥30 dB
Toptica eagleyard’s DBR series of distributed Bragg grating (DBR) laser diodes contains a multi-section laser with gain, phase and distributed feedback (DFB) sections. DBR series laser diodes feature a built-in wavelength-selective grating stabilizing the wavelength
The DBR series’ resonator comprises a periodic structure. Thus, the devices operate on a single resonator mode emitting quasi-monochromatic radiation with a very small line width and low phase noise. The lasers can have very low-intensity noise because of the lack of mode partition noise. Due to the Gaussian mode the output is diffraction-limited..
Special variants are available, especially suitable for spectroscopy with mode‐hop free operation and small linewidth guaranteed at the specified target wavelength for spectroscopic applications – these laser diodes are reaching the target wavelength by temperature tuning and allow wavelength tuning around this target wavelength.
Center Wavelength: 632 nm, 633 nm
Narrow Linewidth: Typ. 1.0 MHz
Threshold Current: ≤120 mA
High Side Mode Suppression Ratio: ≥ 30 dB
Max. Output Power: 10 mW CW
Max. Forward Current: 160 mA
Including Monitor Diode, TEC Cooler and Thermistor
Package: Hermetic 14-pin Butterfly
Applications: HeNe Laser Replacement; Spectroscopy; Metrology; Sensing
Manufacturer Series Name:
Related links to "DBR Single Frequency Laser Diodes"