CP12G05 Aluminum Cold Plate with 4-Pass Copper tube, straight fittings

 
  • C008692-6

Delivery time on request

304 mm X 127 mm, 0.004 °C/W, Tubed Cold Plate. The CP12™ is a dual-sided, copper tubed cold... more
Product information "CP12G05 Aluminum Cold Plate with 4-Pass Copper tube, straight fittings"

304 mm X 127 mm, 0.004 °C/W, Tubed Cold Plate.
The CP12™ is a dual-sided, copper tubed cold plate that offers high performance and a large mounting area. The tubes of the CP12™ cold plates are coplanar with the plate to allow for dual-sided mounting. The cold plate's tube side offers higher performance as the copper tubes are in direct contact with the component being cooled. Its epoxy-free construction results in 30% better performance than other similar sized cold plates. Our range of standard tubed cold plates provide cost-effective thermal solutions for component cooling applications where the heat load is low-to-moderate. These tubed cold plates consist of copper tubes pressed into a channeled aluminum extrusion. This “Press-Lock” technology eliminates the need for performance-limiting epoxy between the tube and the plate, resulting in superior thermal performance. Each tubed cold plate has a single tube with no joint, ensuring leak-free operation.

Length Cold Plate : 304 mm
Width Cold Plate : 127 mm
Performance : 0.004 °C/W
Fluid Compatibility: Water, Common Coolants
Wetted Path: Copper
Mounting Surface: Dual-Sided
Tube: 9.5 mm
Configuration: 4-Pass
Fitting: Straight (SB)
Plate Material: Aluminum
Maximum Pressure : 150 psi
Maximum Flow Rate : 8 lpm
Thickness : 12.7 mm
Type: Tubed Cold Plate
Related links to "CP12G05 Aluminum Cold Plate with 4-Pass Copper tube, straight fittings"
Read, write and discuss reviews... more
Customer evaluation for "CP12G05 Aluminum Cold Plate with 4-Pass Copper tube, straight fittings"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.

Top seller
Viewed