C-Series 1.4MP 2/3” CCD Cameras

C-Series 1.4MP 2_3” CCD Cameras Mightex
 
  • SW11213
1.4 MP; Pixel Size 6.45x6.45 µm; Sensor Size 2/3” Diagonal; Colour or B/W; 15-49 fps;... more
Product information "C-Series 1.4MP 2/3” CCD Cameras"

1.4 MP; Pixel Size 6.45x6.45 µm; Sensor Size 2/3” Diagonal; Colour or B/W; 15-49 fps; Resolution 8, 12 bit; USB 2.0; Buffered; Progressive Scan; Board-level or Enclosed; Global Shutter

Mightex’s C-Series USB 2.0 1.4 MP 2/3” CCD cameras with frame buffers are optimized for machine-vision applications, and they can be also used for a wide variety of applications such as digital microscopy and medical imaging, where quality, ease of use, and cost-effectiveness are crucial.

C-Series high-sensitivity 2/3” CCD cameras are available as colour or B/W versions, with 1.4 MP (1392x1040) resolution and 8 or 12 bit, and can be ordered as “naked” board-level device or pre-mounted in an enclosure. Monochrome cameras often exhibit a 20% higher spatial resolution than their colour counterparts because no pixel interpolation is necessary. Without a Bayer colour filter on the sensor, monochrome cameras are also more sensitive than colour sensors, especially in near IR and UV regions.

C-Series 2/3” CCD cameras have built-in frame buffers, global shutter, external trigger-in, strobe-out, and a powerful camera engine that supports multiple cameras. The frame rate can be as high as 15 fps in full resolution and up to 80 fps using ROI mode.

In addition, a user-friendly GUI based application software and an SDK are provided for custom software development. A USB command set protocol is also provided for non-Windows based applications.

Available models are:

  • CXN-C013-U: colour, board-level
  • CXE-C013-U: colour, enclosed
  • CXN-B013-U: B/W, board-level
  • CXE-B013-U: B/W, enclosed

Note: Board-level cameras are designed for OEM applications, when a system-level enclosure is usually provided. In order to avoid electro-static discharge (ESD) related damages, workforce handling a board-level camera should be properly grounded. ESD related damages are considered as mishandling and are not covered by product warranty. For lab use, it is strongly recommended to choose an enclosed camera instead of a board-level one.

Key Features:

  • Colour or Black&White (B/W, Monochrome)
  • Built-in Frame Buffer (8 Frames at Full Resolution)
  • Support Multi-Camera Applications
  • B/W Cameras Feature Higher Sensitivity (Especially in Near IR and UV)
  • Board-level or Enclosed Versions Available
  • Ultra-compact
  • Active Imaging Pixels: 1.4 MP, 1392x1040
  • Pixel Size: 6.45 x 6.45 µm
  • Sensor Size: 11.0 mm Diagonal (2/3”)
  • 8 or 12 bit
  • Progressive Scanning System
  • Frame Rate: 15 to 49 fps
  • Global Shutter
  • 4-pin GPIOs
  • Interface: High-speed USB 2.0 (480 Mbit/s), No Need for External Power Supply
  • Digital Output, No Need for Frame Grabber
  • Full-featured SDK
  • Compatible With Windows 2000, XP, Vista, Windows 7 and 8
  • TWAIN Driver
  • USB Protocol for Non-Windows-based Applications
  • External and Software Trigger
  • Strobe Output for External Flash
  • ROI and Pixel Skipping/Binning
  • OEM Versions Available

Applications: Digital Microscopy; Machine Vision; Fluorescence Imaging; Medical Imaging; Semiconductor Equipment; Test Instruments; Document Scanners; 2D Barcode Readers; High-quality ID Photos; Security Camera; Astrophotography

Product Group: CCD Cameras
Manufacturer Series Name: C-Series 1.4MP 2/3”
Related links to "C-Series 1.4MP 2/3” CCD Cameras"
Read, write and discuss reviews... more
Customer evaluation for "C-Series 1.4MP 2/3” CCD Cameras"
Write an evaluation
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.

Top seller
Viewed