1.4 MP; Pixel Size 4.65x4.65 µm; Sensor Size 7.60x6.20 mm; Colour or B/W; 15-49 fps; Resolution 8, 12 bit; USB 2.0; Buffered; Progressive Scan; Board-level or Enclosed; Global Shutter
Mightex C-Series USB 2.0 1.4 MP 1/2” CCD cameras with frame buffers have high sensitivity and low noise, and they are optimized for a wide variety of applications, including machine-vision applications, digital microscopy and medical imaging, where quality, ease of use, and cost-effectiveness are crucial.
C-Series high-sensitivity 1/2” CCD cameras are available as colour or B/W versions, with 1.4 MP (1392x1040) resolution and 8 or 12 bit, and can be ordered as “naked” board-level device or pre-mounted in an enclosure. Monochrome cameras often exhibit a 20% higher spatial resolution than their colour counterparts because no pixel interpolation is necessary. Since there is no Bayer colour filter on the sensor, monochrome cameras are more sensitive than colour sensors, especially in near IR and UV regions.
C-Series 1/2” CCD cameras have built-in frame buffers, global shutter, external trigger-in, strobe-out, and a powerful camera engine that supports multiple cameras. The frame rate can be as high as 15 fps in full resolution and up to 80 fps using ROI mode.
In addition, a user-friendly GUI based application software and an SDK are provided for custom software development. A USB command set protocol is also provided for non-Windows based applications.
Available models are:
- CCN-C013-U: colour, board-level
- CCE-C013-U: colour, enclosed
- CCN-B013-U: B/W, board-level
- CCE-B013-U: B/W, enclosed
Note: Board-level cameras are designed for OEM applications, when a system-level enclosure is usually provided. In order to avoid electro-static discharge (ESD) related damages, workforce handling a board-level camera should be properly grounded. ESD related damages are considered as mishandling and are not covered by product warranty. For lab use, it is strongly recommended to choose an enclosed camera instead of a board-level one.
Key Features:
- Colour or Black&White (B/W, Monochrome)
- Built-in Frame Buffer 32 MByte (24 Frames (Colour), 8 Frames (B/W) at Full Resolution)
- Support Simultaneous Image Capturing From Multiple Cameras
- Higher Sensitivity Than CMOS Cameras
- B/W Cameras Feature Higher Sensitivity (Especially in Near IR and UV)
- Board-level or Enclosed Versions Available
- Ultra-compact
- Active Imaging Pixels: 1.4 MP, 1392x1040
- Pixel Size: 4.65 x 4.65 µm
- Sensor Size: 7.60 x 6.20 mm (1/2” Diagonal)
- 8 or 12 bit
- Progressive Scanning System
- Frame Rate: 15 to 49 fps
- Global Shutter
- 4-pin GPIOs
- Interface: High-speed USB 2.0 (480 Mbit/s), No Need for External Power Supply
- Digital Output, No Need for Frame Grabber
- Full-featured SDK
- DirectShow & TWAIN Drivers
- Linux Driver Available
- USB Command Set for Non-Windows-based Applications
- External and Software Trigger
- Strobe Output for External Flash
- ROI and Pixel Skipping
- OEM Versions Available
Applications: Digital Microscopy; Machine Vision; Medical Imaging; Semiconductor Equipment; Test Instruments; Document Scanners; 2D Barcode Readers; Web Camera and Security Video; High-quality ID Photos
Product Group: | CCD Cameras |
Manufacturer Series Name: | C-Series 1.4MP 1/2” |