B-Series CMOS Cameras

AMS item number: SW11205

0.36-5 MP; Pixel Size 2.2x2.2-6.0x6.0 µm; Sensor Size 1/3”-1/2” Diagonal; Colour or B/W; 3-310... more

Product information "B-Series CMOS Cameras"

0.36-5 MP; Pixel Size 2.2x2.2-6.0x6.0 µm; Sensor Size 1/3”-1/2” Diagonal; Colour or B/W; 3-310 fps; Resolution 8-12 bit; USB 2.0; Buffered; Progressive Scan; Dynamic Range >55-70 dB; Board-level or Enclosed

Mightex’s B-Series USB 2.0 CMOS cameras with frame buffers are optimized for machine-vision applications, and they can also be used for a wide variety of other applications such as digital microscopy and medical imaging, where quality, ease of use, and cost-effectiveness are crucial.

B-Series cameras are available as colour or B/W versions, with resolutions from Wide VGA (WVGA, 752x480) up to 5 MP (2592x1944) and 8, 10 or 12 bit, and they can be ordered as “naked” board-level device or pre-mounted in an enclosure. Monochrome cameras often exhibit a 20% higher spatial resolution than their colour counterparts because no pixel interpolation is necessary. Without a Bayer colour filter on the sensor, monochrome cameras are also more sensitive than colour sensors, especially in near IR and UV regions.

Mightex’s B-Series cameras feature built-in frame buffers, global shutter (Wide VGA versions), external trigger-in, strobe-out, and a powerful camera engine that supports multiple cameras. The frame rate can be as high as 60 fps in full resolution and up to 600 fps using ROI mode (depending on colour or B/W and sensor resolution).

In addition, a user-friendly GUI based application software and an SDK are provided for custom software development. A DirectShow driver and a TWAIN driver are included (except for 5 MP B/W versions), and a USB command set protocol is provided for non-Windows based applications. A Linux driver is also either included (5 MP and Wide VGA B/W versions) or available upon request.

Available models are:

BCN-C050-U/BCN-C050-US: 5 MP, colour, lens mount C/CS, board-level
BCE-C050-U/BCE-C050-US: 5 MP, colour, lens mount C/CS, enclosed
BCN-B050-U/BTN-B050-U: 5 MP, B/W, 8/12 bit, lens mount C or CS, board-level
BCE-B050-U/BTE-B050-U: 5 MP, B/W, 8/12 bit, lens mount C or CS, enclosed
BCN-C030-U/BCN-C030-US: 3 MP, colour, lens mount C/CS, board-level
BCE-C030-U/BCE-C030-US: 3 MP, colour, lens mount C/CS, enclosed
BCN-B013-U/BCN-B013-US: 1.3 MP, B/W, 8 bit, lens mount C/CS, board-level
BCE-B013-U/BCE-B013-US: 1.3 MP, B/W, 8 bit, lens mount C/CS, enclosed
BTN-B013-U/BTN-B013-US: 1.3 MP, B/W, 10 bit, lens mount C/CS, board-level
BTE-B013-U/BTE-B013-US: 1.3 MP, B/W, 10 bit, lens mount C/CS, enclosed
BCN-CG04-U/BCN-CG04-US: WVGA, colour, lens mount C/CS, board-level
BCE-CG04-U/BCE-CG04-US: WVGA, colour, lens mount C/CS, enclosed
BCN-BG04-U/BCN-BG04-US: WVGA, B/W, 8 bit, lens mount C/CS, board-level
BCE-BG04-U/BCE-BG04-US: WVGA, B/W, 8 bit, lens mount C/CS, enclosed
BTN-BG04-U/BTN-BG04-US: WVGA, B/W, 10 bit, lens mount C/CS, board-level
BTE-BG04-U/BTE-BG04-US: WVGA, B/W, 10 bit, lens mount C/CS, enclosed

Note: Board-level cameras are designed for OEM applications, when a system-level enclosure is usually provided. In order to avoid electro-static discharge (ESD) related damages, workforce handling a board-level camera should be properly grounded. ESD related damages are considered as mishandling and are not covered by product warranty. For lab use, it is strongly recommended to choose an enclosed camera instead of a board-level one.

Key Features:

Colour or Black&White (B/W, Monochrome)
Board-level or Enclosed Versions Available
Ultra-compact
Active Imaging Pixels: 0.36 to 5 MP, 752x480 to 2592x1944
Pixel Size: 2.2 x 2.2 to 6.0 x 6.0 µm
Sensor Size (Diagonal): 1/3” to 1/2”
Dynamic Range: >55 to 70 dB
Buffered, 32 MByte On-board Memory (3 to 23 Frames at Full Resolution, Depending on Sensor)
8, 10 or 12 bit Gray Level
Progressive Scanning System
Frame Rate: 3 to 310 fps
True Global Shutter (Wide VGA Versions)
Supports Simultaneous Image Capturing From Multiple Cameras
4-pin GPIOs
Arbitrary ROI Supported (Wide VGA Versions)
Interface: High-speed USB 2.0 (480 Mbit/s), No Need for External Power Supply
Digital Output, No Need for Frame Grabber
Custom Programmable With SDK Provided
DirectShow & TWAIN Drivers
Linux Driver (5 MP and Wide VGA B/W Versions)
USB Command Set Protocol for Non-Windows-based Applications
External and Software Trigger
Strobe Output for External Flash
Precise Frame Rate Setting (Wide VGA Versions)
ROI (Not Wide VGA Versions) and Pixel Skipping/Binning
OEM Versions Available

Applications: Machine Vision and Stereo Vision; Medical Imaging; Semiconductor Equipment; Test Instruments; High-quality ID Photo Capture; Document Scanners; Digital Microscopy; Web Camera and Security Video